ATSS has a client in Mobile, AL looking for First Class Outside Machinists 


Machinist First Class (Outside)


Technically proficient in tasks, work processes, and equipment operation.
Accountable for completion of daily work assignments in safety, quality, schedule, and budget.
Works under limited direct supervision.
Knowledge of equipment, work processes and techniques used for outside machine operations.
Must demonstrate the ability to read, interpret, and work from blueprints, job specifications, instruction manuals, manufacturer’s handbooks, change orders, and contract specifications.
Must understand metric to English and English to metric conversions.
Studies blueprints, sketches, drawings, manuals, specifications, or sample part to determine dimensions and tolerances of finished work piece, sequence of operations, and set-up requirements.
Overhauls and repairs mechanical equipment as required.
Sets up and uses rigging equipment such as chain falls, ratchet hoists, lifting straps, shackles, eye bolts, and cables.
Prepare and install proper lockout/tagout to protect work.
May be assigned to work any shift.
Measures and fits metal and/or resin chocks for large machinery such as generators, main engines, reduction gears, etc.
Installs and aligns main propulsion units, diesel/steam turbines, propellers, shafts and other major auxiliary shipboard equipment.

Minimal Required Tools – OSM 1st Class


6″ Dial Calipers.
Metric Allen wrenches to 12mm.
4lb hammer.
Combination metric wrenches (12mm-24mm).
Metric sockets (12mm-24mm).
Allen wrenches to 3/4″.
16 oz ball-peen hammer.
48 oz machinist’s hammer.
10″ adjustable wrench.
12″ adjustable wrench.
15″ adjustable wrench.
1/2″ drive ratchet and breaker-bar with 3/8″-1-1/4″ sockets.
14″ pipe-wrench.
Set of screwdrivers, slot-drive and Philips.
Set of punches with center punch.
Combination wrenches, 3/8″-1-1/4″.
Toolbox with lock.
12′ tape measure.
Side cutter pliers (dykes).
Set of machinist’s wedges.
Set of chisels (3/8″-3/4″).
Small tote-bag or small box.
6″ steel scale.
Bronze hammer.
Feeler-gauge set (.0015″-.200″).
12″ channel-lock pliers.
6″ tool-holder.